UTStarcom PPC 6700 User Manual page 117

• Apply "Date and time stamp" while capturing
automatically compose the current date and time in the captured images.
• Flicker
or 60Hz) of the country where the device is being used.
• Save. Select where you want to save your captured files. You can either save the
files to main memory or to a storage card.
• Image tab. This field provides image-related settings for captured files.
• Prefix type and Prefix
image file is set to "IMAGE" followed by a sequential number, for example: IMAGE_
00001.jpg. To change this prefix, select String in the Prefix type list, and then enter
the desired characters in the Prefix string box.
• Counter
and some sequential numbers, such as 00000, 00001, 00002, and so on. To reset
the numbering to "00001" for your captured image files, tap Reset counter.
• JPEG Quality. Select the JPEG image quality level for all captured still images. You
can choose from SuperFine, Fine, Normal, and Basic.
• Self-Timer. Select the Self-Timer option for capturing images: Off, 5 seconds,
or 10 seconds. Selecting 5 seconds or 10 seconds delays the capturing by the
specified time after you press CAMERA or ENTER.
• Auto-stitch the snapped images while in Panorama
is selected, the camera automatically stitches all snapped images into one single
file. If you do not select this check box while capturing images in Panorama mode,
the snapped images are saved as separate files.
• Video tab. The options in this field are for configuring the advanced settings of the
captured video files.
• Prefix type and Prefix
video file is set to "VIDEO" followed by a sequential number, for example: VIDEO_
00001.avi. To change this prefix, select String in the Prefix type list and enter the
desired characters in the Prefix string box.
• Counter
and some sequential numbers, such as 00000, 00001, 00002, and so on. To reset
the numbering to "00001" for your captured video files, tap Reset counter.
|
116 Experiencing Multimedia
adjustment. To eliminate flicker image, select the proper frequency (50Hz
string. By default, the file name of each new captured
Index. By default, the newly captured image files are named with a prefix
string. By default, the file name of each new, captured
Index. By default, the newly captured video files are named with a prefix
images. Select this check box to
mode. When this check box