Saving The Configuration Data On A Diskette (Backup) - AGFA CR 75.0 Reference Manual

Saving the configuration data on a diskette
(backup)
Via the Save configuration function in the key-operator main menu you can
make backup files of the machine specific data.
To make a backup:
1
Check that the CR 75.0 is not scanning an image plate.
If the CR 75.0 is scanning an image plate, the status indicator at the top of the
machine is green and flashing.
2
In the key-operator main menu, select 'Save configuration' via the Up and
Down keys and confirm.
Queue management
Digitizer set-up
Date and Time
Send test image
System info
Install
Save configuration
Fast preview
The CR 75.0 will display the Save configuration menu.
Please insert the
existing backup floppy
or a new and empty floppy
and press
70
KEY-OPERATOR
MENU
: quit
: ok
: select
SERVICE XXXXX
SAVE
CONFIGURATION
: cancel
: ok
SERVICE XXXXX
2241A EN 20040210