Setting The Date And Time - AGFA CR 75.0 Reference Manual

Setting the date and time

To set the clock of the CR 75.0:
1
In the key-operator main menu, select 'Date and time' via the Up and Down
keys and confirm.
Queue management
Digitizer set-up
Date and Time
Send test image
System info
Install
Save configuration
Fast preview
The CR 75.0 will display the Date and time menu:
Format:
YY- MM- DD HH : MM: SS
98 -11 - 06
# If you do not press a key within 1 minute, the CR 75.0 will exit the key-
operator mode.
2
Set the date and time:
•
Use the Left and Right keys to select the digit you want to change ('tab');
•
Use the Up and Down keys to set the digit to the desired value ('inc. dec.').
3
Confirm the date and time.
The operator main screen is displayed.
48
KEY-OPERATOR
: quit
: ok
: select
SERVICE XXXXX
DATE AND
: quit
14 : 24 : 58
: ok
: tab
: inc. dec.
SERVICE XXXXX
MENU
TIME
2241A EN 20040210