Page 1
Do not hold the handle on the camera when transporting. This unit may fall off from the camera STUDIO ADAPTER and cause injuries. KA-790G INSTRUCTIONS Bars Maintenance Wipe the external cabinet of the unit with a soft cloth. Do not wipe the body with benzene or thinner.
Page 2
Check that the front mount clip is not sticking out Installation If the clip is sticking out, pull the lock lever while pressing the safety lever to release the lock. Memo : ● Other than when attaching or detaching the camera, be sure Front Mount Clip to tighten the two screws on the sides.
Page 3
Attach VF-HP790G and other accessories when Connect the cables and close this unit necessary Tighten the two screws on the sides firmly Close Bundle the cables Memo : ● For details, refer to the [INSTRUCTIONS] of VF-HP790G. If necessary, remove the cap and bundle the cables with a cable clamp.