* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
User interface con0 is available.
Press ENTER to get started.
Password:
# Enter the correct password to verify that you can access the CLI.
<Switch1> system-view
System View: return to User View with Ctrl+Z.
[Switch1]
Configuration files
#
user-interface con 0
authentication-mode password
user-role network-admin
set authentication password hash $h$6$4PKgIe09Fnyq3ZGB$Gjw9CActpVa5IJm9oGEgMBxt
opkZkEYv7CriP31oqNJOpAyBPwxIvOds+7XcJ5aGz2xaO77H3CsaSMpRzKenq0Q==
#
Example: Configuring local scheme
authentication for console users
Network requirements
Configure local scheme authentication for console users on the switch in
to provide the username test and password test at login.
Figure 2 Network diagram
Requirements analysis
To meet the network requirements, perform the following tasks:
To require a console user to provide a username and password at login, configure scheme
•
authentication for the console user interface.
3
*
*
Figure
2. Require console users