Part/surface
Recommended cleaning method
Burner parts
Clean away food particles with a
soft brush and rinse with clear
water. Carefully dry burner parts
before assembly.
Do not clean in a dishwasher!
Ignition
If required, clean with a fine brush.
sparkers
Burnt-on dirt
For hard-to-remove, burnt-on dirt, you can order a
cleaning gel from our online shop, from your specialist
retailer or our after-sales service (item
number 00311859). It is suitable for pan supports and
the stainless-steel recess. If necessary, let the dirt soak
overnight. Follow the instructions on the cleaning agent.
Caution!
Damage to the surface
Do not use the cleaning gel on the burner parts.
Do not use these cleaning agents
Scouring or chemically aggressive cleaners
■
Acidic cleaners (e.g. vinegar, citric acid, etc)
■
Cleaners containing chlorine or with a high content
■
of alcohol
Oven cleaner
■
Hard and scratchy sponges, brushes or scouring
■
pads
Thoroughly wash out new sponge cloths before
■
using them.
Using cleaning gel
Remove pan supports, burner caps and burner
1.
heads.
Apply cleaning gel.
2.
Leave the cleaning gel on for a few minutes.
3.
Use warm water and a soft sponge to clean the
4.
surface.
Wipe with a wet soft cloth.
5.
Dry with a dry soft cloth.
6.
Cleaning
en
9
Need help?
Do you have a question about the PPH6S6F20I and is the answer not in the manual?
Questions and answers