Parkside PPHM 14 A1 Operation And Safety Notes page 41

Error
The value shown in
the display 6 is not
reacting.
The value shown in the
display 6 is not reacting
(cont.).
Possible causes/
solutions
Is HOLD shown in the display
6 ? If yes, press CAL/
HOLD 4 . The display will be
reacting now.
If not, remove and reinsert the
battery to reset the product.
Error
You can barely see the
value in the display 6 .
Electrostatic discharges can lead to malfunctions.
In the event of such malfunctions, remove and reinsert the
battery.
Possible causes/
solutions
The battery is low. Replace
the battery (see "Inserting/
changing the battery").
GB 41