Advertisement
Available languages
Available languages
To make the task easier, lay the
base plate (A) on two pallets or
similar.
Fit the base plate on the interior
side of the end gable. Insert the
first two corner bolts in (B) and
then insert the six in the centre (C).
Bolts are 10 x 20 mm.
Repeat the procedure to fit the
other end gable.
Wait before fully tightening the
bolts.
Fit the two roof brackets inside in
the corner posts at the desired
height (two options) using 10 x 60
mm bolts and nuts.
Bolt the side pieces to the corner
posts using 14 x 120 mm bolts and
nuts (D).
The transport bracket for the top
bar handle (E) is only used when
transporting the hay rack.
P. Lindberg A/S
Tel.: +45 70212626
A
B
C
3
Sdr. Ringvej 1
6600 Vejen, Denmark
D
E
MAN 9041213 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk
Advertisement
