ETC 7180A1018 Setup Manual

ETC Setup Guide
DIN rail Enclosures
Overview
This document covers the installation of the DIN28 - large DIN rail enclosure (ETC Part 7180A1018),
DIN14 - small vertical DIN rail enclosure (ETC Part 7180A1019), DIN14-H - small horizontal DIN rail
enclosure (ETC Part 7180A1019-H), and the DIN8 - mini DIN rail enclosure (ETC Part 7180A1030).
Installation
1: Remove the screws securing the front cover to the enclosure.
2: Use the measurements provided below for specifications to assist with installation.
17 mm
(0.67")
130 mm
(5.11")
203 mm
(8")
24 mm
(0.95")
209 mm
(8.23")
130 mm
(5.12")
3: Secure the DIN rail enclosure to a fire resistant surface, such as drywall, masonry, or concrete, using
four bolts (mounting hardware not provided).
4: Prior to drilling holes in the enclosure for conduit entry, remove electronics (if installed).
5: Drill conduit access following the installation requirements for the DIN-mounted devices.
Corporate Headquarters Middleton, WI, USA +1 608 831 4116 London, UK +44 (0)20 8896 1000
Holzkirchen, DE +49 (80 24) 47 00-0 Rome, IT +39 (06) 32 111 683 Hong Kong +852 2799 1220 Paris, FR +33 1 4243 3535
Web
© 2019 Electronic Theatre Controls, Inc. Trademark and patent info:
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
7180M2270 Rev E Released 2019-12
356 mm
(14")
267 mm
(10.5")
44 mm
(1.75")
7180A1030
356 mm
(14")
267 mm
(10.5")
44 mm
(1.75")
7180A1019
7180A1019-H
etcconnect.com Support support.etcconnect.com
24 mm
(0.95")
711 mm
(28")
622 mm
(24.5")
Contact etcconnect.com/contactETC
etcconnect.com/ip
356 mm
(14")
267 mm
(10.5")
44 mm
(1.75")
7180A1018