Advertisement
ETC Setup Guide
DIN rail Enclosures
6:
Remove any metal shavings and debris from the enclosure.
7:
Install the provided voltage barrier in one of the possible locations in the enclosure. Multiple locations
are provided in the enclosure to meet your installation needs. Use the provided four screws to secure
the barrier in place..
8:
Install the DIN rail devices to the DIN rail.
9:
Complete the wire terminations and installation procedure for the installed devices as specified in the
device's installation manual.
10:
Reinstall the cover, securing it in place with the previously removed screws.
DIN rail Enclosures Setup Guide
7180A1019-H
7180A1019
Page 2 of 2
7180A1030
7180A1018
ETC
Advertisement
