NETGEAR ProSafe FVS336G Reference Manual page 42

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
3. Click view protocol bindings (if required). The WAN1 Protocol Bindings screen is
displayed.
Figure 2-12
Enter the following data in the Add Protocol Binding options:
a. Service. From the pull-down menu, choose the desired Service or application to be
covered by this rule. If the desired service or application does not appear in the list, you
must define it using the Services menu (see
b. Source Network. These settings determine which computers on your network are affected
by this rule. Select the desired options:
• Any. All PCs and devices on your LAN.
• Single address. Enter the required address and the rule will be applied to that
particular PC.
• Address range. If this option is selected, you must enter the start and finish fields.
• Group 1-Group 8. If this option is selected, the devices assigned to this group will be
affected. (You may also assign a customized name to the group. See Edit Group
Names on the Groups and Hosts menu in the LAN Groups sub-menu.)
c. Destination Network. These settings determine which Internet locations are covered by
the rule, based on their IP address. Select the desired option:
• Any. All Internet IP address are covered by this rule.
• Single address. Enter the required address in the start field.
2-16
"About Services-Based Rules" on page
Connecting the FVS336G to the Internet
v1.2, June 2008
4-3).