NETGEAR ProSafe FVS336G Reference Manual page 105

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
.
Figure 5-7
5. Select which WAN interface (WAN1 or WAN2) will act as this endpoint of the VPN tunnel.
6. Enter the public Remote WAN IP address of the gateway to which you want to connect.
Alternatively, you can provide the Internet name of the gateway. The Internet name is the Fully
Qualified Domain Name (FQDN); for example, vpn.netgear.com.
7. Enter the Local WAN IP Address or Internet name. Both local and remote ends should be
defined as either IP addresses or Internet Names (FQDN). A combination of IP address and
Internet Name is not permissible.
8. Click Apply. The VPN Policies screen is displayed showing that the Client policy "home" has
been added and enabled.
Virtual Private Networking Using IPsec
v1.2, June 2008
5-9