NETGEAR ProSafe FVS336G Reference Manual page 187

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Note: Both incoming and outgoing traffic are included in the limit
• Increase this month limit by. Temporarily increase the Traffic Limit if you have reached
the monthly limit, but need to continue accessing the Internet. Select the checkbox and
enter the desired increase. (The checkbox will automatically be cleared when saved so that
the increase is only applied once.)
• This month limit. Displays the limit for the current month.
3. In the Traffic Counter section, make your traffic counter selections:
• Restart Traffic Counter Now. Select this option and click Apply to restart the Traffic
Counter immediately.
• Restart Traffic Counter at a Specific Time. Restart the Traffic Counter at a specific time
and day of the month. Fill in the time fields and choose AM or PM and the day of the
month from the pull-down menus.
• Send e-mail report before restarting counter. An E-mail report will be sent immediately
before restarting the counter. You must configure the E-mail screen in order for this
function to work (see
4. In the When limit is reached section, make the following choice:
• Block all traffic. All access to and from the Internet will be blocked.
• Block all traffic except E-mail. Only E-mail traffic will be allowed. All other traffic will
be blocked.
• Send E-mail alert. You must configure the E-mail screen in order for this function to
work.
5. Click Apply to save your settings.
The Internet Traffic Statistics section displays statistics on Internet Traffic via the WAN port.
If you have not enabled the Traffic Meter, these statistics are not available.
6. Click the Traffic by Protocol link, in the upper right header, to see a report of the Internet
traffic by type. The volume of traffic for each protocol will be displayed in a popup window.
Traffic counters are updated in MBytes scale; the counter starts only when traffic passed is at
least 1MB.
7. Click the WAN2 Traffic Meter tab and repeat this process to configure the Traffic Meter for
the WAN2 port.
Monitoring System Performance
"E-Mail Notifications of Event Logs and Alerts" on page
v1.2, June 2008
4-33).
9-3