How To Connect Your Nature's Generator Power Pod Elite To The Nature's Generator Elite; How To Maintain And Store Your Nature's Generator Power Pod Elite; Troubleshoo�Ng - Nature's Generator Elite User Manual

How to Connect Your Nature's Generator Power Pod Elite to Nature's Generator Elite
You can connect your Nature's Generator Power Pod Elite to your Nature's Generator Elite to
extend the overall run �me.
1. Open the top cover of the Nature's Generator Power Pod Elite, locate the expansion cable, and
run the expansion cable out of Nature's Generator Power Pod Elite through the opening on the
back of the Nature's Generator Power Pod Elite.
2. Locate expansion port on the back of your Nature's Generator Elite and open the rubber cover.
3. Connect the expansion cable to the expansion port. Due to the amount of voltage running
between the Nature's Generator Elite and Nature's Generator Power Pod Elite, this is a very �ght
fit to ensure no electrical shock while connec�ng.
4. The Expansion (chain link) Icon will be illuminated on the display of Nature's Generator Elite to
indicate Nature's Generator Power Pod Elite is connected.
You will experience an increased run �me of 100% by adding one Nature's Generator Power Pod Elite,
200% by adding two Nature's Generator Power Pod Elites and 300% by adding three Nature's
Generator Power Pod Elites.

How to Maintain and Store Your Nature's Generator Power Pod Elite

Please recharge your Nature's Generator Power Pod Elite once every four months and store in a
ven�lated, cool and dry loca�on. If possible, please connect your Nature's Generator Power Pod
Elite to the solar panel while in storage to top off the ba�ery voltage. This keeps the ba�ery healthy
and prolongs its life. Failure to maintain Nature's Generator Power Pod Elite by these steps can
result in ba�ery damage which will void the product warranty.
Please clean your Nature's Generator Power Pod Elite with a so�, lint-free cloth. If your Nature's
Generator Power Pod Elite is especially dirty, moisten a so�, lint-free cloth in a weak detergent
solu�on, squeeze the excess moisture from the cloth, then wipe the cabinet with the cloth. Use a
clean cloth to dry your Nature's Generator Power Pod Elite.
Troubleshooting
My Nature's Generator Power Pod Elite won't charge when I connect my solar panel to it.
Please follow these steps.
1. Make sure the solar panel is pointed directly toward the sun. It is preferred to posi�on the solar
panel facing south. The solar panel may produce li�le or no power if it is posi�oned in shade.
2. Check the cable connec�on on your Nature's Generator Power Pod Elite and make sure it is
properly connected.
3. If the LEDs light up, but are not running. It means Nature's Generator Power Pod Elite is being
fully charged by the solar panel or solar panel does not have high enough voltage to recharge the
Nature's Generator Power Pod Elite.
14 Visit Naturesgenerator.com for More Information