Connect Your Power Transfer Switch To Nature's Generator Elite - Nature's Generator Power Transfer Kit Elite User Manual

Connect Your Power Transfer Switch to Nature's Generator Elite

Once the Power Transfer Switch has been successfully installed by a qualified electrician, you can
now connect your Power Transfer Switch to your Nature's Generator Elite by using the included
power cord.
You can connect up to six circuits from your breakers into your Power Transfer Kit Elite. You
may select the most common used circuits like refrigerators, lights in hallway or bathroom,
bedroom outlets and etc. The run �me are affected by the combined loading on the connected
circuits and the amount of the Nature's Generator Power Pod Elite that are connected to Nature's
Generator Elite.
1. Fit the female connector of the included power cord into the power inlet of your Power Transfer
Switch. Turn the connector clockwise to secure the connec�on.
2. Insert the male connector of the included power cord into the AC outlet on the back of Nature's
Generator Elite.
1
Visit NaturesGenerator.com for More Information
Connect
3