Recording To Dvd Disc - Pioneer PRV-LX1 Operating Instructions Manual

Title Editing / Chapter Editing

Recording to DVD Disc

Projects edited on hard disk drive can be recorded to
DVD-Video disc by using the EDIT section = [DVD
Disc] = [Make Disc] command. By using the EDIT
section = [DVD Disc] = [Make Disc] = [Target]
command, the destination drive used for the
recording is designated as "DVD1". If an additional
expansion drive has been added, "DVD2" or
"DVD1&2" can also be selected. Discs cannot be
removed until the [Make Disc] processing has been
completed.
The volume label given to the DVD disc will be the
same as the project name.
Use the [Make Image] command for creating image
files on the hard disk (see "Recording from HDD to
DVD" on page 44).
EDIT section = [DVD Disc] = [Make Disc]
Executing the Make Disc command on EDIT section =
[DVD Disc]
66
PRV-LX1
En