Recording To Dvd Discs - Pioneer PRV-LX1 Operating Instructions Manual

Recording
APP section = [Auto Capture] = [EDL Load/Delete]
APP section = [Auto Capture] = [EDL Save]
Note 1:
Edit lists can be composed outside of the recorder
and imported (see page 72 "Inporting Image Data,
Edit Lists").
Note 2:
If [EDL] is used when target drive is set to HDD,
initialize and finalize commands are ignored.

Recording to DVD Discs

Data can be recorded on an unused or not finalized
DVD-R or DVD-RW disc.
A finalized DVD-RW disc must be initialized or
finalization must be canceled before reuse.
Note:
However, finalization of DVD-RW discs finalized
using the initial PRV-LX1 version (prior to 1.12/1.02)
cannot be canceled. See "System Information" on
page 31 for information on how to check system
version.
1 Disc initialization
Use the EDIT section = [DVD Disc] = [Initialize]
command to initialize DVD-RW discs. Select
"Quick Format" or "Full Blank" (all previously
recorded material is erased). "Full Blank" takes
30 minutes to 1 hour to complete.
42
PRV-LX1
En
EDIT section = [DVD Disc] = [Initialize] = [Initialize]
Initialize confirmation dialog
Initialize progress bar (appears during initialization)
2 Canceling finalization
Finalization can be canceled by selecting the EDIT
section = [DVD Disc] = [Unfinalize] command.
The PRV-LX1 can only canceling finalization discs
that it has been finalized on the PRV-LX1.
Finalization cannot be canceled for two drives
simultaneously.
Note 1:
The DVD menu information is lost when a disc is
canceled finalization. When a disc has been canceled
Finalization, use the EDIT section = [DVD Menu]
command to set the DVD menu again.