Hardware Installation - Dell Networking S4048T-ON Getting Started Manual

This information describes installation of the S4048T-ON system. Dell recommends
completing the installation procedures in the order presented here.
Topics:
• Operation and safety considerations
• Ground and bracket installation
• ReadyRails installation
• System installation
• Ground wire installation
• AC or DC power supply installation
• Installing a Fan Module
• Installing the SFP+ and QSFP+ Optics
• Supply Power and Power Up the System
• After Installing the S4048T-ON
Operation and safety considerations
Before installing the switch, review these operation and safety guidelines.
Review these guidelines for switch installation:
• You have enough clearance to the front of the switch so you can read the light emitting
diodes (LEDs).
• The AC power cord reaches from the power outlet to the power supply unit (PSU) side
connector.
• The switch is rack-mounted before you power it up.
• Cabling is away from sources of electrical noise, such as radios, power lines, and
fluorescent lighting. Ensure that the cabling is safely away from other devices that might
damage the cables. If needed, allow one rack unit (RU) space between devices to
provide room for cabling.
6

Hardware installation

Hardware installation
3