Service And Adjustments; Storage; After Each Use; Yearly Maintenance - Craftsman 358.799370 Operator's Manual

CHECK FOR DAMAGED OR
WORN PARTS
Refer replacement of damaged/wom
parts to your Seers Service Center.
• On/Off Switch- Ensure switchfunc-
tkx_s p ropedy b ymo_ng theswitch t o
the Off pusilk_. Make sure motor
stope;then rsstsrt motor and cor_ue.
AFTER EACH USE
CLEAN UNIT & LABELS
• Stop the unit and disconnect the ex-
tension cord.
• Clean the unit using a damp cloth
with a mild detergenL
• Wipe off unit with a clean dry cloth.
YEARLY
CLEAN COLLECTION BAG
IMPORTANT: THE COLLECTION BAG
MUST BE PROPERLY EMPTIED.
• YOUmust properly empty and main-
tain the collectionbag to avoid dete-
riorationand obstruc_n of air flow.
• Stop the unit and disconnectthe ex-
tension cord.
• Remove the bag and empty after
each use. Do not store bag without
emptyingthe bag of all contents.
• Wash the bag once a year by turning
inside out and washing with a water
hose. Be sure to let bag dry com-
pletely before reusingthe unit.
HOW TO REMOVE AN OBJECT
FROM THE AIR INTAKE
NOTE: If the unit becomes dogged, or
an object is drawn into the air intake,
stop the unit and disconnect the exten-
sion cord. Wait untilthe impeller has
completely stopped turning, then re-
move the vacuum tubes. Carefutty
reach into the vacuum opening and
clear out the air intake area.
Inspect the impellerfor cracks. If
cracked or damaged, do not use the
unit. Have parts replaced by your
Sears Service Center. Do not attempt
to replace them yourself.
PARTS AVAILABLE
Vacuum Tube Set ..... 530-402499
Inlet Restdctor ........ 530-402045
Collection Bag ....... . 530-402533
Gutter Kit ................ 71-79992
Safety Glasses ....... 71-85707
Extensmn Cord ..... i'i _ 71-5702
Prepare unit for storage at the end of
the season or if it will not be used for
30 days or more.
WARNING:
• Secure the unitbefore storing or
transporting.
• Store unitwith aftguards in place.
-Position unitso that any sharp object
cannot accidentally cause injury.
• Store unit well-out of the-reach of
children.
BLOWER STORAGE
• Diso00nect from the power source.
• Clean the entire unit.
• Open inlet cover and clean any dirt,
grass, or debris that has collected.
Inspectthe blower and all tubes.
Close end make sure the cover is
latched.
• Clean air vents and air inlet of debds.
• Store your unit and extension cord in
a well ventilated area and covered, if
possible,to prevent dust and dirt ac-
cumulation. Do not cover with plastic.
Plastic cannot breathe and may
cause condensationand eventual
rust or corrosion.
• Check entire unitfor loose screws,
nuts, and bolts. Replace any dam-
aged, worn, or broken parts.
10