Hardware Monitor Setup - MSI 845 Pro Manual

Chapter 3

Hardware Monitor Setup

This section describes how to set the CPU FSB frequency, monitor the
current hardware status including CPU/system temperatures, CPU/System
Fan speeds, Vcore etc. Monitor function is available only if there is hard-
ware monitoring mechanism onboard.
(C)2001 American Megatrends, Inc. All Rights Reserved
CPU Ratio Selection
CPU FSB (Mhz)
Spread Spectrum
CPU Vcore Adjust
CPU Vcore
DRAM Voltage Adjust
Chassis Intrusion
CPU Temperature
System Temperature
CPU Fan Speed
System Fan Speed
Vcore
Vio
+ 5.0V
+12.0V
–12.0V
– 5.0V
Battery
+5V SB
CPU Ratio Selection
The item is used to adjust the CPU clock multiplier (ratio). The item enables
you to overclock the processor. Settings: 8.0x, and from 10.0x to 24.0x at
1.0x increment.
CPU Front Side Bus (Mhz)
This item is used to set clock frequencies (in MHz) for CPU FSB (Front Side
Bus). The field provides you an overclocking method. Settings range from
100 (MHz) to 190 (MHz) at 1 increment.
ClkGen Spread Spectrum
This item is used to configure the clock generator's Spread Spectrum feature.
Settings: Enabled and Disabled. Always disable the feature when
AMIBIOS SETUP - Hardware Monitor Setup
8.0x
100
Enabled
No
1.750V
3.3V
Disabled
29°C/84°F
39°C/102°F
6124 RPM
0 RPM
1.71V
3.26V
4.92V
11.40V
–11.56V
– 4.99V
3.22V
4.87V
3-24
↑↓←→ : Select Item
ESC : Quit
F1 : Help PU/PD/+/- : Modify
F5 : Load Previous Values
F6 : Load Fail-Safe Defaults
F7 : Load Optimized Defaults