Table of Contents
Advertisement
4. Remove any empty cartridges.
Always follow the steps listed above in preparing to load your grease gun before proceeding to the
one of the following loading methods.
There are three ways to load the grease gun:
•
Cartridge Loading
•
Bulk Fill
•
Filler Pump Loading
Cartridge Loading
1. Completely draw back the plunger handle and lock it in place.
2. Remove the gun head (1) from the grease gun barrel (23) by turning it counter-clockwise.
3. Insert the open end of the cartridge into the grease gun barrel (23) and push it all the way in.
4. Remove the seal or pull the tab end from the cartridge.
Page 9 of 17
Advertisement
Table of Contents
