Advertisement
Available languages
Available languages
Using Your Steam Mop
IMPORTANT:
Make sure you don't
use the mop without attaching a
micro-fiber pocket and adding water
to the tank first. When you are using
the mop for the first time, it might
take longer than the normal 30
seconds to start steaming. Just pump
the handle a few times in a downward
motion to prime the pump and it
should be ready.
1
NOTE: Make sure the floors are swept
or vacuumed before using the steam
mop.
Pull and twist the quick release cord
1-
holder to unwrap the power cord
completely. A great time saver!
Plug into a 220-240-volt electrical
outlet. The power "On" light will turn
blue, it takes approximately 30
seconds for the mop to heat up and
the steam to be ready.
2-
Pump the handle a few times in a
downward motion. This pumping
action will release steam as you mop
and allows you to customize the
amount of steam you want. Begin
mopping with a forward and
backward motion. The natural motion
of mopping will produce steam.
2
Advertisement
