Advertisement
Available languages
Available languages
Quick Start
4
QUICK TIP:
For easier
pushing
and pulling,
extend the
handle
length
5
PREPARE
5-
For your comfort, you can adjust
the height of the mop. J ust lift
the latch on the tube 90 degrees
to the open position. Holding the
handle, extend the tube to the
height that's right for you and
then close latch to locked
position.
6-
Plug in mop and wait 30 seconds
or less for the mop to heat up.
Pump the handle of the mop by
pushing downward about 10 to
12 times to create steam.
NOTE: Steam is created
automatically when you start
mopping.
DIRT CAN'T HIDE ON
EITHER SIDE! All new design
allows for optimal cleaning!
When one side of the pocket
gets dirty, just turn the mop
head over and clean with the
other side of the pocket.
QUICK TIP: We've added
additional mop heads for your
convenience. Each mop head
can be used on your floors. The
Triangle Mop Head was
specifically designed to reach
into those tight corners and
spaces, especially those found
in the bathroom. Head is
completely versatile.
NOTE: Do not leave your Steam
Mop unattended during use.
IMPORTANT: Never leave the
steam mop in one spot for any
period of time with a damp or wet
micro-fiber pocket attached as
this will damage your floors.
Advertisement
