Fakir Steam Mop Manual page 26

Getting Started - cont'd
IMPORTANT:
First things first, always make sure the mop
is UNPLUGGED from the wall when not in
use. Never fill the mop, attach the mop
head, change or remove the micro-fiber
pocket when the mop is plugged into the
wall. If you have hard water you might want
to use distilled water to prolong the life of
the Fakir ® Steam Mop. Make sure you only
add water to the tank. Chemicals or cleaning
solution may damage the appliance and
could be unsafe for you and your family.
1
1-
Turn the water tank cap counter clockwise
and remove from the tank.
Use the filling flask and pour water into
the tank. Please don't overfill. Replace
the cap on the water tank by turning
clockwise and tightening.
2-
Select a mop head and cleaning pad.
Each mop head can be used on your
floors. The Triangle Mop Head was
specifically designed to reach into those
tight corners and spaces, especially those
found in the bathroom.
Then attach the quick fasteners on the
top of the pocket to secure in place. You
can also use the loop to pull the dirty
pocket off when you are done mopping
after it has cooled.
2
Snap the mop head into the base to
3-
secure it.
3