Ec Declaration Of Conformity - Proxxon MF 70 cnc-ready Manual

guides can be readjusted simply if the play becomes too
great after a sufficiently long period of use. Please note
that the procedure for the miller and compound table is the
same.
1. Loosen the hexagonal nuts 1.
2. Screw in the setscrews 2 slightly with a suitable Allen
key. The setting is correct if play is minimal, but the
guide still works smoothly.
Please note:
Excessive tightening of the setscrews results in increased
wear and may damage the guide!
3. Following successful adjustment, hold the setscrews
in the correct position with an Allen key and counter
lock by tightening the hexagonal nuts.
8.2 Cleaning
Always pull out the miller mains plug prior to maintenance,
cleaning and repairs. Inadvertent activation may result in
injury!
To ensure a long service life, the machine should be
cleaned with a soft cloth, hand brush or paintbrush after
each use. Use of a vacuum cleaner is also recommended
here.
The outside of the housing can then be cleaned with a soft
cloth, dampened if necessary. It is possible to use mild
soap or another suitable cleaning agent. Solvents or clean-
ing agents containing alcohol (e.g. petrol, cleaning alcohols,
etc.) should be avoided, since these can attack the plastic
parts.
It is best to apply a drop of machine oil to moving parts
occasionally. The milling head guides and compound table
should be lubricated at regular intervals.
8.3 Repairs:
Always pull out the mains plug before maintenance, clean-
ing and repairs. Inadvertent activation may result in injury!
Repairs should only be realised by qualified skilled person-
nel or, better still, by the PROXXON Central Service! Never
repair electrical parts, but always replace them with
original PROXXON spare parts!
Caution:
Caution:
9 Disposal
Please do not dispose of this machine in household waste!
The device contains valuable materials which can be recy-
cled. If you have any questions in this respect, please con-
tact your local disposal company or other relevant commu-
nal facilities.

10 EC Declaration of Conformity

Name and address:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation:
Article No.:
We hereby declare on our sole responsibility that this
product conforms to the following directives and nor-
mative documents:
EU EMC Directive
DIN EN 55014-1 / 05.2012
DIN EN 55014-2 / 06.2009
DIN EN 61000-3-2 / 03.2010
DIN EN 61000-3-3 / 03.2014
EU Machinery Directive
DIN EN 61029-1 / 01.2010
Date: 17/04/2013
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Appliance Safety Division
The CE document authorized agent is identical to the
signatory.
MF 70 CNC-ready
27112
2004/108/EC
2006/42/EC
- 13 -