Installing In Vehicle - Mee-go SWIRL Instruction Manual

1

INSTALLING IN VEHICLE:

Note! If your vehicle does not have an I-Size seating position, please check the vehicle type list
that is included.
Please select an appropriate seat in the vehicle
Unfold the support leg (1), until it locks
Pull the isofix extent strap (8A) under seat body, and both ISOFIX (3) will extend out automatically
The safety indicator must be clearly visible on both ISOFIX release buttons
Push the seat towards the backrest until it is fully aligned with the backrest
Latch both ISOFIX attachments on the car seat onto the corresponding ISOFIX lower anchorage
points on the vehicle. It is latched completely when you hear a "click" and installation of the
ISOFIX is complete when indicators (5) show green.
Ensure no spaces between the car seat and the vehicle backrest.
Pull the isofix extent strap (8A) and push seat body to ensure the car seat base stays firmly in
position against the seat and back rest of vehicle
NOTE! The ISOFIX anchorage points (7) are 2 metal lugs per seat and located between the
backrest and the seat of the car. If you are in any doubt consult your vehicle instruction
manual for assistance.
If the ISOFIX anchorage points in your car are difficult to access, you should use the connect
guides provided to avoid damaging the cover
If necessary, attach the connect guides provided with the longer lug pointing upwards into both
ISOFIX anchorage points. In many cars it is more e ective to install the connect guides in an
opposing direction.
NOTE! Do not put any objects in the foot area in front of the child seat.
7
3 5
7