360 Rotation - Mee-go SWIRL Instruction Manual

360 ROTATION:

O
The car seat can be rotated 360 , to make it easier to put your child into and take out of the
vehicle. This also allows you to change the position from rearward-facing to forward-facing.
Push rotation button 14, to rotate the seat shell towards the door to strap the child in without
difficulty, please also see chapter, "Securing by means of harness system".
The Car seat shell can be locked into the preferred place and you will hear an audible "Click"
NOTE! Before starting your journey you must return the seat shell to a defined locked position
by pressing the position adjustment handle.
If the indicator light is still showing green then the seat is not locked correctly into the desired
position.
NOTE! Make sure that the seat shell is correctly locked into place by trying to rotate it,
without pressing the position adjustment handle.
NOTE! Avoid getting any dirt or sand in between the upper seat shell (13) and the base (15).
This can have a negative impact on the performance of the rotation and recline. Should this
happen, the dirt should be removed before rotating and reclining the seat any further to
avoid any permanent damage to the seat.
WARNING! While traveling the car seat must always be locked in the rearward-facing or
forward-facing position. Never use the seat in locked crossways position or in any unlocked
intermediate position while traveling.
14
O
12