Securing By Means Of Harness System - Mee-go SWIRL Instruction Manual

SECURING BY MEANS OF A HARNESS SYSTEM:
The shoulder belts are firmly attached to the headrest and must not be adjusted separately.
NOTE! Ensure that the headrest is correctly locked in place before using the car seat.
NOTE! Ensure that the car seat is free from toys and hard objects.
Loosen shoulder belts by pressing the adjustment button (16) on central adjuster and
simultaneously pulling both shoulder belts (17) up
NOTE! Always pull on the shoulder belts, do not pull on the belt pads.
Undo the belt buckle(20) by pressing the red button(18) firmly
NOTE! Ensure the shoulder belts are not twisted
Put your child into the car seat.
Place shoulder belts directly over your child's shoulders
Place both belt tongues (19) together and lock them in place in belt buckle with an audible "click"
Pull cautiously on central adjustment belt in order to tighten shoulder belts until they fit your
child's body
NOTE! For the car seat to offer optimum protection, shoulder belts should fit the body as
closely as possible. Please ensure that the lap belts lie close to the hip as low as possible and
are appropriately tight.
13