Removing The Cover - Mee-go SWIRL Instruction Manual

REMOVING THE COVER:

The cover consists of 7 components fixed to the seat shell by hook and loop fastener, elastic
piping, snap buttons and brackets. Once you have released all of the fastenings, you can remove
the individual components for washing.
Proceed as follows:
Open the belt buckle of the 5-point belt system
Open all of the snap buttons of the pads and cover parts
Unhook the shoulder pads from the brackets
Remove all belt pads.
Thread the shoulder belts out of the cover
To fix the cover onto the seat again carry out the steps in the reverse order
NOTE! When remounting the shoulder pads, its is essentials to ensure that:
the closed side faces towards the child's neck
the shoulder pads are perfectly mounted on the brackets
the shoulder belts are guided inside the shoulder pads
WARNING! The cover is an integral component of the car seat's safety design. The car seat
must therefore never be used without the cover.
17