Related Manuals for Uplift Desk Power Pole
Summary of Contents for Uplift Desk Power Pole
- Page 1 ® Power Pole for Power & Data Rail two person assembly For further info or assistance, visit upliftdesk.com 355 lb call 800-349-3839 or email support@upliftdesk.com Patent Pending, ©2020 UPLIFT Desk®. All Rights Reserved...
- Page 2 Thank you for choosing UPLIFT Desk.
-
Page 3: Safety And Warnings
SAFETY AND WARNINGS WARNING: Designed for use in dry work environments only. Risk of fire, electric shock, or personal in- jury if used outdoors or in a damp location. Use only indoors. WARNING: To reduce the risk of burns, fire or electric shock, hard wiring of power infeed cables must be performed by a licensed electrician only in accordance with the NEC and local codes. - Page 4 3 (x5) 3 (x5) available. The Power Pole is a telescoping design that works with ceil- ings between 8 and 12 feet high. Included with the Power Pole 3 (x5) 3 (x5) assembly is a 216-inch long hardwired flexible conduit power infeed cable.
- Page 5 3mm Allen wrench. If you are installing more than one Power Pole, follow Steps 2 and 3 for the remaining Power Poles at this time. Then move the assemblies to the approximate locations below where the power and data drops will be.
- Page 6 Power Pole. The Thread-cutting screws may damage the data cables. Step 9 The final step of the Power Pole installation is to run your ca- bles. If you are installing both power and data cables, install the Power infeed cable first.
- Page 7 As noted in Step 6, the hole at the top of the Power Pole can be used for attachment of a junction box or other wiring con- nections.
- Page 8 Copyright Notice: This guide is a component of this UPLIFT Desk Acoustics Product. This guide is a part of the scope of delivery, even if the item is ©...