Replacing The Hard Drive; Determining The Replacement Part Number For The Ssd - Keysight Technologies M9036A User Manual

Service

Replacing the Hard Drive

The Keysight M9036A Embedded controller comes with a 160 GB, 2.5" Serial ATA
(SATA) II Solid State Drive (SSD).

Determining the Replacement Part Number for the SSD

This product may contain a custom image. First, look on the SSD for an
identification label that states "Solid State Drive Replacement Order
#####-#####" to obtain the replacement part number for the SSD. If there is no
identification label on the SSD, then look for the Option Label located near the
serial number on the inside of the front panel to determine the appropriate
option. Refer to the table below to determine which part number to order based
on the product's option for the replacement SSD.
Table 1
Option Operating System/RAM
Label
WXP Windows XP
W73 Windows 7 Pro (32-bit)
W76 Windows 7 Pro (64-bit)
WE3 WES 7 (32-bit)
WE6 WES 7 (64-bit)
60
Order Description
Keysight
Part Number
M9036-5563 Replacement SSD with pre-imaged WinXP 32-bit
2 OS
M9536-5573 Replacement SSD with pre-imaged Win7 32-bit
2 OS
M9536-5576 Replacement SSD with pre-imaged Win7 64-bit
4 OS
M9536-5553 Replacement SSD with pre-imaged WES 7 32-bit
2 OS
M9536-5556 Replacement SSD with pre-imaged WES 7 64-bit
4 OS
Keysight M9036A PXIe Embedded Controller User Guide
Replacing the Hard Drive