Bios Patch Installation Verification - Johnson Controls Digital Vision Network 5000 Series Upgrade Instructions

DVN 5000 BCM Motherboard BIOS
N
OTE
The USB flash drive description may vary.
10. Press <Enter> when asked to Save to CMOS and exit (Y/N)? Y.
The BIOS update selection screen appears.
11. Press 3 on your keyboard.
12. When the confirmation message appears, press any key to continue.
I
MPORTANT
Do not switch off the DVN while the system installs the BIOS patch.
Once the system completes the BIOS patch installation, the DVN
automatically restarts.
13. Remove the flash drive from the DVN.
14. Click the Login button when it becomes highlighted and verify that you can
successfully log on to the DVN.
BIOS P I
ATCH NSTALLATION
 To verify the patch was successfully installed:
1. Restart the DVN.
2. During the boot up process, press and hold the <Tab> key on your keyboard.
The current BCM motherboard BIOS version appears briefly.
3. Verify the system displays BIOS Version 2.10C.
4
V
ERIFICATION
This document contains confidential and proprietary information of Johnson Controls, Inc.
Upgrade Instructions
24-10129-128 Rev. –
© 2011 Johnson Controls, Inc.