Steps
1. Align the numbering on the processor fan and heat-sink assembly with the numbering on the system board.
2. In the sequential order (1->2->3->4), tighten the captive screws that secure the processor fan and heat-sink assembly to the system
board.
3. Connect the processor-fan cable from the system board.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
Processor
Removing the processor
Prerequisites
1. Follow the procedure in
2. Remove the
left-side
cover.
3. Remove the
processor fan and heat-sink
NOTE:
The processor might still be hot after the computer is shut down. Allow the processor to cool down before
removing it.
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
46
Removing and installing components
After working inside your
computer.
Before working inside your
assembly.
computer.