The following images indicate the location of the 2.5-inch hard-drive assembly and provide a visual representation of the installation
procedure.
Steps
1. Place the hard drive into the hard-drive carrier and align the tabs on the carrier with the slots on the hard drive.
2. Snap the hard-drive carrier into the hard drive.
3. Slide the hard-drive assembly into the hard-drive cage until it snaps into place.
4. Connect the data cable and power cable to the hard drive.
Next steps
1. Install the
left-side
cover.
2. Follow the procedure in
After working inside your
computer.
Removing and installing components
23