Canon imageCLASS MF216n Manual page 5

Receiving Faxes - e-Manual
or a telephone call. (Setting values: 4 to 30 seconds;
default setting: 6 seconds)
<Incoming Ring Time>
Enables you to specify the duration during which an
incoming call rings for a telephone call. (Setting
values: 15 to 300 seconds; default setting: 15
seconds)
<Action After Ring>
Enables you to specify how the machine operates if
you do not pick up the handset while an incoming call
is ringing. Select <End> to disconnect the call or
<Receive> to receive an incoming fax. (Default
setting: <Receive>)
When selecting <DRPD: Select Fax>
Select the ring pattern that your telephone company assigned
to your fax number.
If you want to print received documents on both sides of
paper: Print on Both Sides
If you want to print information, such as reception date and
time, at the bottom of received documents:
Footer
If you want to continue printing even when the toner is low:
Continue Print. When Near Cart. Life End
Using a Telephone to Receive Faxes (Remote
Reception)
When you pick up the telephone and get a fax signal, you do not
need to go to the machine to receive the fax. Just enter a specific ID
file://westonfile01/ITDept/Docs/Canon%20imageCLASS%20M...
Page 5 of 6
RX Page
4/17/2015