Table of Contents
Advertisement
1. Mounting plate
2. Bolts
3.
Torque the bolts to 92 to 113 N∙m (68 to 82 ft-lb).
4
Mounting the Debris Blower
to the Traction Unit
Parts needed for this procedure:
1
Debris blower assembly
1
Locking pin
1
Hairpin cotter
Procedure
1.
Remove any attachments from the front of the
machine.
2.
Move the traction unit into position behind the
attachment adapter.
3.
Raise the traction unit adapter into the
attachment adapter.
Note:
Raise the jack stand higher than the
castors.
4.
Insert the locking pin through the adapters and
secure it with a hairpin cotter
Figure 11
3. Locknuts
(Figure
12).
g021677
1. Locking pin
5.
Install the drive shaft to the quick attach frame
by sliding the quick coupler onto the shaft
(Figure
13).
1. Drive shaft
6.
Secure the safety chain to the quick attach
frame
(Figure
7.
Remove the dust plugs from the hydraulic
couplers and ensure that the couplers are free
of any dirt or debris.
9
Figure 12
2. Hairpin cotter
Figure 13
2. Quick attach frame shaft
13).
g023910
g021678
Advertisement
Table of Contents
