Table of Contents
Advertisement
7.
Lift the blower until the strap is tight.
1. Lift loop
8.
Carefully remove the bolts holding the blower
to the wood pallet.
9.
Slide the crate away from the blower and lower
the blower until the castor wheels touch the floor
keeping the strap tight
1. Bolts
10.
Insert the jack-stand tube into the frame tube,
align the holes, and secure it into position with
the snapper pin
(Figure
Figure 6
(Figure
7).
Figure 7
8).
g021675
1. Frame tube
2. Snapper pin
11.
Remove the cable tie securing the crank handle
to the jack crank.
12.
Crank the jack stand down until the jack pad is
level with the castor wheel tires.
13.
Remove the strap from the blower lift loop.
g021676
7
Figure 8
3. Jack stand
g021637
Advertisement
Table of Contents
