Replacing The Oven Light; After-Sales Service - Siemens HB 56 M.50B Installation And Operating Instructions Manual

Replacing the oven
light
Method
Replacing the glass cover

After-sales service

If the oven light fails, it must be replaced. 40 watt
heat-resistant spare bulbs can be obtained from the
after-sales service or specialist shops.
Only use these bulbs.
1.
Switch off the oven fuse in the fuse box.
2.
Place a tea towel in the cold oven to prevent
damage.
3.
Unscrew the glass cover by turning it
anti-clockwise.
4.
Replace the oven light with one of the same type.
5.
Screw the glass cover back on.
6.
Remove the tea towel and switch the fuse back
on.
The glass cover on the oven light must be replaced if
it is damaged. Replacement glass covers may be
obtained from the after-sales service. To this end,
please specify the E number and FD number of your
appliance.
Our after-sales service is there for you if your oven
needs repairing.You will find the address and
telephone number of your nearest after-sales service
centre in the phone book. The after-sales service
centres listed will also be happy to advise you of a
service point in your local area.
43