Installation - Dometic DM20 Series Operating Manual

Installation

6 Installation
!
CAUTION! Health hazard
To avoid a hazard due to instability of the device, it must be fixed in
accordance with the instructions.
6.1 Notes on mounting into furniture
You can mount the minibar in four ways into furniture. Choose your favoured
alternative (fig. 5, page 5).
Observe the following:
• The cut-out dimensions H x W x D are:
– DM20D: 385 x 404 x 428 mm
– DM20F: 385 x 404 x 426+d mm
d is the thickness of the hotel's own decor
• The clearance between the minibar's back and the furniture wall should be
approx. 10 mm.
• The ventilation openings for the chosen alternative have to be produced (fig. 5,
page 5).
• Air passing through the inlet air duct must not be heated by any heat sources
(heaters, direct sunlight, gas ovens etc.).
➤ Fix the refrigerator in place using suitable screws (fig. 6 1 and 2, page 6).
6.2 Connecting the minibar electrically
➤ Plug the 230 V connection cable into the AC voltage socket and connect it to the
230 V AC mains supply.
✓ The status LED lights up.
✓ The minibar starts cooling the interior.
6.3 Mounting hotel's own door decor (DM20F only)
The hotel's own door decor has to comply with the following requirements:
• Maximum weight: 2 kg
• Maximum thickness: 14 mm
➤ Fasten the decor with four screws.
16
DM20
EN