Extra Rinse; Control Lock; Using The Pre-Wash Option; Rinse+Spin - LG WM3400CW Owner's Manual

• Each press of this button increases the delay
time by 1 hour, for up to 19 hours.
• Once the desired delay time is set, press the
Start/Pause button to start the delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer automatically turns
off after a certain time and all cycle settings are
lost.

Extra Rinse

This option adds an extra rinse to the selected
cycle. Use this option to help ensure the removal
of detergent or bleach residue from fabrics.
• Press the Extra Rinse button to add additional
rinses to the cycle.

Using the Pre-wash Option

This option adds a pre-wash (for about 15 - 17
minutes) for improved cleaning of heavily soiled
or stained clothing.
NOTE
• If you select Pre-wash after putting the
detergent directly in the drum, the detergent
may be washed away, reducing the washing
performance.

Rinse+Spin

Select this option to rinse and spin a load
separately from a regular cycle. This can be helpful
in preventing fresh stains from setting in fabrics.
1
Press the Power button to turn on the
washer.
• Do not select a cycle.
2
Press the Rinse+Spin button.
• You can change the spin speed by pressing
the Spin button.
3
Press the Start/Pause button.

Control Lock

Use this function to disable the controls. This
function can prevent children from changing
cycles or operating this washer.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternately shown on the
display during the wash cycle.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking/Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Rinse+Spin button for 3
seconds to activate/deactivate this function.
• When the function is deactivated, a chime will
sound and the remaining time for the current
cycle will reappear on the display.
Spin Only
Use this option to spin clothes and drain the water
from the tub.
• Use this option to drain water if the wash cycle is
interrupted by a power failure or to spin dry
hand-washed items.
1
Press the Power button to turn on the
washer.
• Do not select a cycle.
2
Press and hold the Spin button for 3 seconds.
• You can change the spin speed by pressing
the Spin button.
3
Press the Start/Pause button to begin.
OPERATION 29
and the
CL