Control Lock; Extra Rinse; Rinse+Spin - LG WM3090CW Manual

OPERATION_WM3500CW/WM3460CW/WM3460CV/WM3095CW/WM3090CW/WM3505CW
Cold Wash
This option saves energy by using cooler water while
increasing the wash and rinse times to maintain wash
performance.
NOTE
• Wash time will increase up to several minutes with
the Cold Wash option.
• For best wash results, only wash small loads (less
than 8 lb) with the Cold Wash option.

Extra Rinse

This option will add an extra rinse to the selected
cycle. Use this option to help ensure the removal of
detergent or bleach residue from fabrics. Liquid fabric
softener, if used, is always dispensed in the final
rinse. Pressing the Extra Rinse button twice will add
two additional rinses to the cycle.

Rinse+Spin

Select this cycle to rinse and spin a load separately
from a regular cycle. This can be helpful in preventing
fresh stains from setting in fabrics. You can change
the spin speed by pressing the Spin button.
1
Press the Power button to turn on the washer.
2
Press the Rinse+Spin button.
3
Press the Start/Pause button to start the cycle.

Control Lock

Use this option to disable the controls. This feature
can prevent children from changing cycles or
operating the machine. The feature does not lock
the door. Once the Control Lock is set, it must be
deactivated before any controls, except the Power
button, can be used. Once the washer has shut off,
the Power button will allow the machine to be turned
on, but the controls will still be locked. When the
controls are locked,
the estimated time remaining.
Locking/Unlocking the Control Panel
Press and hold the Control Lock button for 3
seconds.
NOTE
• Turning off the power will not reset the Control Lock
function. You must deactivate Control Lock before
you can access any other functions.
• When Control Lock is turned on, you cannot operate
any buttons except the Power button.
will display alternately with
15