Charging The Battery; Attachingthe Antenna; Installingthe Belt Clip - Uniden UBC3000XLT Operating Manual

~
Charging the Battery
Use the AC Adaptor/Charger to power the
UBC3000XLT from an AC outlet.
AC 240V
Outlet
8
t:J
8
CJ
AAD-2500U
AC Adaptor
Warning! Use only the supplied AC
adaptor/charger. Other external power
sources could cause overheating or
damage the scanner circuits.
Notes:
. It takes 14 - 16 hours to fully charge
the battery.
.
You can operate the scanner while
the battery charges.
. Disconnect the adaptor/charger
during a power failure.
See also, "Battery Maintenance" on
Page 40.
Attaching the Antenna
m~1U8) ~T
D:
Installing the Belt Clip
[Z]
To remove, lift where marked. Push in
direction of arrow.
6