Charging The Battery; Connecting The Charger; Important Notes On Charging The Battery - Uniden MHS75 Owner's Manual

2. Lower the battery until it rests
flat in the compartment.
3. Bring the battery latch up and
snap it into place.

Charging the battery

Connecting the charger

Align the charger with the
battery (on the rear side
of the radio). Slide the
radio into the charger
until it clicks into place.
Connect the other end
of the charger to any standard 12 volt DC "cigarette lighter"
style outlet. The power LED on the top of the plug should
turn orange and remain lit.
CAUTION: If the LED blinks, immediately disconnect
the charger from the DC outlet. Reseat the radio in the
charger before reconnecting the charger to power.
CAUTION: Use only the battery and charger supplied
with this radio. Using a different charger or battery can
damage the radio and create a risk of fire or shock.

Important notes on charging the battery

• Charge the battery fully before using the radio.
• When the battery is completely charged, the power LED
turns green.
• Don't use the charger when the ambient temperature is
below 0º C (32º F) or above 45º C (113º F).
• If the radio is powered down, the battery can charge in
about three and a half hours. (If the radio is powered on,
the battery takes longer to charge.)
• If the battery is empty, the radio can't transmit, even if it's
in the charger.
Uniden MHS75 Radio Owner's Manual
E-13