External Telemetry Interface Board - R.V.R. Elettronica TEX1000LIGHT User Manual

Abnormal conditions affecting bias voltage so as to trigger foldback current limiting
are:
• Reflected output power too high
• External AGC signals (Ext. AGC FWD, Ext. AGC RFL)
• Temperature too high
• Current draw of one RF module too high

7.9 External Telemetry Interface Board

This board provides an I/O interface for the CPU with the outside environment. All
available equipment input and output signals are brought to the REMOTE DB15
connector.
Also mounted on this board is the INTERLOCK IN BNC connector which can
disable device power output. When the central pin is closed to ground, output
power is limited to zero until ground connection is removed.
User Manual
Rev. 1.1 - 06/07/20
TEX1000LIGHT
29
/ 30