Attaching the Antenna
Apply the antenna to the radio as shown.
Be sure the antenna is firmly seated.
Installing the Alkaline Battery Case
1
Snap the battery release clip out and remove
the alkaline battery case.
2
Remove the battery case cover by pulling the
2 halves apart applying your fingers to
the projections.
3
Install 6 AA Alkaline batteries (not included)
into the battery case. Be certain to follow the
+ and – symbols in the compartment.
4
Replace the battery case cover as follows
until it clicks into place.
5
Place the battery case onto the back of
the radio. It will only fit in one way.
6
Snap the battery release clip until it clicks.
Be sure the battery case fits tightly
against the body.
Getting Started
8
Contacts