Uniden XS1455/1455+1 Owner's Manual page 44

Remote.access.with.the.handset.(XS1455.only)
You can operate your answering system from another room using a handset.
• If you press the end key before the answering system answers, the phone will return to standby.
• If the answering system does not answer within 5 seconds, you hear a beep and the phone will return to standby.
• The base's keypad is disabled during remote operation
• When you receive a call, the remote operation is cancelled.
• You can change the handset volume during a remote operation.
• If you have new messages and old messages, after you have reviewed your new messages, you can play your old
messages by pressing /2 again.
) When the phone is in standby mode, press the select/remote key on the handset. Remote Answering Machine
operation appears on the handset display. The answering system announces the current time and the number of
messages stored in the memory.
2) You hear the announcement, "To play incoming messages, press two; For help, press zero."
3) Enter a command within 5 seconds. You may select a command from the chart below.
4) After the command has finished, you hear intermittent beeps indicating that the system is in the command
waiting mode. You may enter another command at this time from the chart below.
5) When you are finished, hang up to exit the system. The answering system automatically returns to standby.
Command
. ./.1
/.2
./.3
./.4
XS1455+1 OM.indd 43
Function
Repeat a Message
Play Incoming Messages
Skip a Message
Delete a Message
Command
. /5.
6
9
0
43
Function
Stop Operation
Answering System On
Answering System Off
Voice Prompts
24/6/08 1:36:38 PM