Uniden XS1455/1455+1 Owner's Manual page 41

Setting.the.Base.Ringer.Volume
The base has three ringer volume settings: high, low, and off. You can change
the ringer volume while in standby or while an incoming call is ringing.
) Press [ringer]. You hear the ringer at the current volume level ([
[ ] Low, [ ] off) (if you set the base ringer volume to off, "Ringer off"
is announced) and it is displayed on the base.
2) Press [ringer] repeatedly until the desired ringer option appears.
3) The system displays the new ringer volume.
Note:.Even.when.the.base.ringer.is.turned.off,.the.handset.will.
still.ring.
Temporarily.Mute.the.Base.Ringer.and.Call.Screen
Press [ ] (play/stop) to temporarily mute the incoming ring and call screen. The ringer will sound with the next
incoming call. To turn the ringer back on for this call, press [ringer]. To hear the answering machine and screen this
call, press [vol/select/ ] or [vol/select/ ].
Adjusting.the.Speaker.Volume.Level
You can adjust the volume of the base speaker by pressing [vol/select/ ] or [vol/select/ ] on the base. Press
[vol/select/ ] for louder or [vol/select/ ] for softer while the base speaker is being used except for menu mode.
The numbers [ ] - [
the loudest.
XS1455+1 OM.indd 40
] are displayed on the base indicating the volume levels. [
] High,
] being the softest and [
40
] being
24/6/08 1:36:36 PM