Using!.(Xs1455+1.Only) - Uniden XS1455/1455+1 Owner's Manual

Register.Handsets.to.the.Main.Base.before.Using!.(XS1455+1.only)
Both handsets will need to be registered to the main base unit before use. Whichever handset you choose to charge
in the base unit will automatically register to the base unit. The handset charging in the extra charging cradle MUST
also be registered to the base unit before use.
To register the extra handset:
) Be sure both handsets are fully charged.
2) Pick up the handset from the charging cradle, and place it in the base unit. The charge/in.use LED light on the
base unit will begin to flash, indicating that the registration is taking place.
3) Wait for at least 5 seconds, then pick up the handset from the base unit.
4) Press [talk/flash] on one handset. If TALK appears on the display, the handset is registered, press [end].
Then try with another handset. If each handset displays TALK, the handset has been registered to the base.
Otherwise, return to step  and try again.
5) Once both handsets are registered, it doesn't matter which handset is placed in the base unit or the charging
cradle.
Note:.
•..When.you.charge.the.handsets,.Caller.ID.summary.screen.and.the.name.
of.the.handset.appears..Following.display.is.the.example.of.handset.No.1.
(Handset.No.1).
•. The.charging.cradle.can.be.used.to.charge.any.handset.
XS1455+1 OM.indd 13
3
24/6/08 1:36:04 PM