Table of Contents
Advertisement
5.
Use this chart to select the
function you want.
6.
When you've finished, hang
up to exit the system.
Your Answering System
automatically returns to
Standby.
To remotely set your XCA650/XCA
l
feature:
(Australian Version ONLY)
1. From any remote phone, dial your phone number.
2. Allow your phone to ring 10 times.
3. After 10 rings, your X C A 6 5 0
machine facility.
4. Once activated, you will hear your OGM announcement.
5. Hang-up immediately.
Function
Press
Repeat
Help Menu
to activate the auto-answer
750
will activate the answering
73
#1
If your XCA650/XCA750 integrated Telephone Answering Device is not
performing to your expectations, please try these simple steps. If you are still
unable to resolve the problems, contact Uniden Customer Service for
assistance.
Telephone Troubleshooting Chart
Problem
Charge light won't come on when Handset
#0
is placed in Base Unit.
Audio sounds weak and/or scratchy.
Can't make or receive calls.
Handset doesn't rlng or receive a page.
Base Unit doesn't ring.
Troubleshooting
Suggestion
Make sure AC Adapter is plugged into the
l
Base Unit and wall outlet.
Make sure Handset is properly seated in
l
Base Unit.
Make sure that the char ing contacts on
l
the Handset and Base unit are clean.
Make sure that the Base Unit antenna is
l
fully extended and vertical.
Move the Handset and/or Base Unit to
l
different locations and try again.
Press chan to select another channel.
l
Check both ends of the Base Unit
l
telephone line cord.
Make sure the AC Adapter is plugged into
l
the Base Unit and wall outlet.
Disconnect the AC Adapter for a few
l
minutes, and then reconnect it.
Nickel-Cadmium battery pack ma be
l
weak. Charge the battery on the Base
Unit for 15-20 hours.
Extend the Base Unit antenna vertically
l
The Handset may be too far away from
l
the Base Unit.
Place the Base Unit away from noise
l
sources.
The Digital Securit
Code may be erased.
l
Set the Digital C J
e.
Set the Base Unit Ringer switch to LO or
l
HI.
74
Advertisement
Table of Contents
