Uniden XCA750 Operating Manual page 27

3.
Press m to stop recording.
The message replays in the
Handset receiver.
4.
Press a again to return
to Standby.
The talk/batt low LED turns off.
47
Base Operation
1. To record an outgoing
message, press and hold
ogm.
Start recording your message
after you hear the long tone
and the Message Counter
LED begins to count up.
2. Do not get closer than 300 mm
from the microphone, and speak
clearly while recording your message.
When you are finished recording,
release ogm.
You hear a tone, and your
message is played on the
Base Unit speaker, The
Message Counter LED resets
to zero,
You
Note: can leave up to a
60-second outgoing message.
48